2024 Sure-Trac 78"x12' 7800# GVW Tilt Equipment Trailer Scissor Hauler * TOOLBOX * TORSION SUSPENSION * RUBRAIL/STAKE POCKETS/D-RINGS * DROP LEG JACK * ADJUSTABLE COUPLER * CUSHION CYLINDER

Scissor Hauler Tilt Equipment - The Sure Trac scissor hauler tilt bed equipment series trailer is a very common model for moving small pieces of equipment such as a trencher, walk behind bobcat, scissor hoists, compact tractors, zero turn mowers, paving roller, etc. The scissor hauler tilt bed trailer is a bit different tilt equipment model as it is a lighter, single axle model. The tilt equipment units feature drop axles for improved load angle, has no beavertail, and has full width loading. The most common sizes are 78x12' 7000#, and a 78x12+4 7800#. It is also offered in a 5x10 with a 5200# axle. The tilt trailers feature about a 1' longer tongue than a traditional trailer for improved stability and better tongue weight. The tilt trailer's also have about a 32" rear knife edge tail, but generally only 24" is counted toward the length (ex: a 18' model will have approx. 18'10" of length). The minimum recommended tow vehicle would be a 1/2 ton truck, although some smaller trucks and larger SUV's would be suitable to haul this trailer depending on the load. The trailer has dual safety latches for ensuring your safety in transport. It also has a cushion cylinder for peace of mind when loading. Sure Trac powdercoats all of the tilt models with one of the most durable finishes in the industry.

SURE-TRAC FEATURES
Adjustable 2-5/16" Coupler
Tube Construction
Pressure Treated 2 x 6 Decking
7K Dropleg Jack
All LED Lights
Hydraulic Dampener
Tube Full Wrap Tongue
Torsion Axle (22.5 Deg. Up)
Easy Lube Hubs
HD Diamond Plate Knife Edge Tail
Sealed Brake Connections
EverLinkTM
White Spoke Wheels
Stake Pockets and Rub Rail
High Performance Wiring Harness
15" (5' wide 5K models)/16" (78" wide, 7K models) Radial Tires
(4) 5K D-Ring Tie Downs

HD Reinforced Diamond Plate Fenders
Rear Board Retainers

Scissor Hauler Tilt Equipment Trailers
-Torsion suspension (All Sure Trac scissor hauler tilt equipment trailers are built on a torsion suspension. A torsion suspension on the trailer enables the lowest possible deck height with providing the best ride quality possible for this application. A torsion is different than leaf spring in that the suspension and hardware is contained within the axle tube, and there is independent suspension at each wheel).
-Finish Quality (No manufacturer says their product is poorly designed or engineered, but let's face it, some products are more refined than others. We find the overall design, looks, material used, welds, wiring, and powdercoat - and more importantly the steel prep, to be superior on a Sure Trac. These "little" intangibles differentiate a trailer. In a market flooded with manufacturers, these "not on a spec sheet" items are why Sure Trac stands out from the rest of the crowd).
-Tubular Full wrap tongue/mainframe (All Sure Trac trailers are built on a tubular full wrap tongue and mainframe. Tube gives maximum strength per pound as it not only withstands vertical load, but also won't flex like channel).
-HD diamond plate fenders (A heavy duty diamond plate fender is both strong and good looking. It also has gussets to the front and rear, providing reinforcement to the fender, a side step of sorts, and protection for the marker lights).
-Adjustable Coupler (Standard on all scissor tilts, an adjustable coupler allows you to set the ball/pintle at different heights to accommodate different tow vehicles. They do an excellent job at reinforcing the coupler with a channel reinforcement. It is also a 6-hole coupler, not a 4 hole, giving more height options).
-Lots of Tie downs! (4 HD D-rings, stake pockets, and full length rub rail. This trailer comes equipped with plenty of tie downs to secure most any load. Many will give either D-rings, Stake Pockets, or both, but not all 3).
-Diamond plate knife edge (The HD 5/16" diamond plate knife edge gives the trailer a strong rear tail that is also lightweight, extremely durable, and provides a nice low load angle without having too much tail weight).
-Bolt on jacks (A bolt on drop leg jack is standard. To deploy a drop leg jack, you pull the pin and it and it extends to the ground. You simply have to crank the jack the height of the ball rather than 15"+. If it gets damaged, it's an easy replacement rather than a trip to a fab shop).
-Powdercoat Tough (Our trailers have one of the toughest finishes on the market, in large part due to the steel prep prior to final finish. One of the best finishes on the market, particularly at the price point).
-Painted Underside (Hard to believe, but if you've crawled under many trailers, you'll quickly find that paint on the underside of some trailers is an option...makes you wonder where else shortcuts are being made).
-Bullet LED lights (Brighter, longer lasting, and they have less draw. Now with the new bullet style which are sleeker and less of a target. Some competitors are still using stud mount incandescent lights)
-Easy lube hubs (This standard feature makes servicing your bearings a breeze for any homeowner armed with a grease gun and a few hand tools)
-Radial Tires (16" 10-ply Radial tires. Longer lasting and better riding, radial tires should be on all trailers, but sadly, some name brands you've probably heard of still use bias...beware of the "hybrid" tire, which looks like a radial, but is still a bias tire with reduced tread wear).
-Self adjusting brakes (We equip all of our tandem axles with brakes on both axles. The brakes are self or forward adjusting, much like a vehicle, and automatically adjust to the proper clearance via spring tension).
-Extended Triple Tube Tongue (The extended triple tube tongue provides a wide stance, giving maximum stability to the trailer. It also gives sufficient turning capability to most wider tow vehicles, such as a flat bed truck. It also helps ensure a proper amount of tongue weight).
-Silicone joints (Sure Trac protects the various seams of the trailer from the elements, such as between the tongue and mainframe, fender backer, between bed and bedframe, etc).
-Sealed wiring harness/Sealed brake connections (More time using the trailer and less time working on it! Our trailer features a sealed modular harness, equipped with plug & play sealed brake connections. The wiring is concealed and protected, in frame, and is grommeted at every penetration).